You are Here:

Search AcmeIndustrial.com
for Mil Spec, ANSI or ACME part number



MS/NAS Style - A286 CRES Keylocking Threaded Inserts
Miniature - Inch

Material: Insert - A286 CRES (140 KSI Min)
  Keys- 302 CRES
Finish: Passivated
Tolerances: ±.010 inch unless specified otherwise
Internal Threads: Per SAE AS8879
Dimensions: All dimensions below are in inches
Keys: Miniature inserts are furnished with 2 locking keys
Material Identification Mark: One line on top of insert
Lubrication: Dry Film Lube on Self-Locking Inserts only
Performance: MIL-I-45914A (MS51830)

To request a quote

Click on the
MS or ACME part number
in the chart below

Call
800-323-5582

or email us at
acmemail@acmeindustrial.com
and a representative will contact you shortly.

Insert Installation/
Removal
Non-Locking Self-Locking Dimensions
MS/NAS ACME Part Number MS/NAS ACME Part Number Internal
Thread
Class 3B
External
Thread
Class 2A
G
Thread
H
Install Tool
Part No.
217-078281 0 - 80 6 - 40 .085 .100 217-072550
217-078282 217-079282 2 - 56 6 - 40 .085 .100 217-072551
MS51830CA101 217-078283 MS51830CA101L 217-079283 2 - 56 8 - 32 .090 .120 217-072552
MS51830CA102 217-078284 MS51830CA102L 217-079284 4 - 40 10 - 32 .125 .170 217-072554
MS51830CA103 217-078285 MS51830CA103L 217-079285 6 - 32 12 - 28 .125 .170 217-072556
MS51830CA104 217-078286 MS51830CA104L 217-079286 8 - 32 1/4 - 28* .175 .220 217-072558
* Modified Minor Diameter
For inserts with the following options, add the letter code shown to the end of the Acme part number:
S — Silver Plate per AMS 2410
SN — Silver Plate Only, No Dry Film Lube (Self-Locking Inserts Only
DFL — Dry Film Lube (Non-Locking INserts Only)
K — Self Broaching Keys



ISO 9001
Registered
Quality
System


Aerospace Industries
Association