Oil Groove Bushings Type OG

  • Used for drill lubriation or as a bearing
  • Lubricant (or coolant) flows through grooves in bushing I.D. wall
  • 25 Oil Groove styles available — headless or with heads
  • Wiper designs available to help guard against dirt or chips

NOTE: The oil groove should not break out the wiper end of the bushing

Need More Info?

Call 800-323-5582
or email us at [email protected] and a representative will contact you shortly.
Wiper Specifications: Oil groove does not run out on wiper end.
Material: Tool Steel unless specified otherwise by customer.
Range: 1/2″ to 8″ I.D. and 1/2″ to 6″ long. Styles 1-9 must be 5/8″ I.D. or larger.
Oil Grooves: 1/16″ wide x 1/32 deep.
Oil Holes: 1/4″ Diameter (If I.D., O.D. and/or Length are 1″ or less. Oil hole will be 1/8″ Diameter and O.D. groove will be 3/16″ wide x 1/32″ deep).
Order by: Acme/ANSI Symbol or by I.D., O.D. and Length, indicating desired style of Oil Groove. Example: Style 18 Oil Groove, 1″ x 1-3/8″ x 3/4″ Type P and WA Wiper.

Wiper Styles: