You are Here:

Search AcmeIndustrial.com
for Mil Spec, ANSI or ACME part number



Specific Use - Cast-In Threaded Inserts
Metric

   
Material: Stainless - 303 or equivalent
Brass - 360 or equivalent
Finish: Stainless Steel - Passivated
  Brass - None
Tolerances: ±.13 mm unless specified otherwise
Dimensions: All dimensions below are in millimeters
Material Identification Mark: None
Lubrication: None
 

Call
800-323-5582
or email us at
acmemail@acmeindustrial.com
and a representative will
contact you shortly.

To request a quote, Click on the MS or Acme part number in the chart below.

ACME Part Number Dimensions
Stainless Stainless Self-Locking Brass Internal Thread Class 6H D
Major Outisde Dia.
F
Min. Full Thread
H
Overall Length
J
Dist. to Lock (Ref)
K
Over Knurl
N
Minor Outside Dia.
216-080031 216-080131 216-080231 M3 x 0.5 5.0 4.5 8.5 2.4 5.4 4.3
216-080032 216-080132 216-080232 M3.5 x 0.6 6.5 5.0 9.0 2.4 6.9 5.2
216-080033 216-080133 216-080233 M4 x 0.7 7.0 5.5 9.5 3.9 7.4 5.7
216-080034 216-080134 216-080234 M5 x 0.8 8.0 7.5 11.5 3.9 8.4 6.8
216-080035 216-080135 216-080235 M6 x 1.0 9.5 9.5 15.5 3.9 9.9 8.7
216-080036 216-080136 216-080236 M8 x 1.25 11.5 11.5 18.0 4.8 11.9 10.7
216-080037 216-080137 216-080237 M8 x 1.0
216-080038 216-080138 216-080238 M10 x 1.5 15.0 13.5 20.0 4.8 15.4 13.9
216-080039 216-080139 216-080239 M10 x 1.25



ISO 9001
Registered
Quality
System


Aerospace Industries
Association