Embedment Bushings

For Use In Soft Materials

* Fraction I.D. Range is in increments of 1/64″ (except where indicated otherwise)
Embedment Bushings are Priced on Request

Types DG and SL are also available in Metric Sizes

I.D. Range
Drill Size
Standard I.D. Tolerance
(add to nominal I.D.)
7/64 to 1/4 +.0001 to +.0004
Over 1/4 to 3/4 +.0001 to +.0005
Over 3/4 to 49/64 +.0002 to +.0006

Type DG -Diamond Groove

The Diamond-Groove type (DG) has a special knurl that provides superior holding strength in potting compounds and castable materials. The number of grooves is dependent on the length of the bushing.

All Dimensions are in inches.

Type SG – Ser-Groove

The Ser-Groove (SG) bushing consists of a serration that permits the bushing to be pressed into a jig or fixture made of soft material or laminated fiberglass while maintaining its holding strength.

All Dimensions are in inches.

Type SL – Spline Lock

The Spline-Lock (SL) type bushing features a partially serrated and partially ground outside diameter. This configuration enables the bushing to be pressed into soft metals or wood.

All Dimensions are in inches.