Blind End Threaded Inserts
Blind End Inserts are used if there is concern about debris collecting in an assembly.
Material:
Inserts – 303 CRES
Keys – 302 CRES
Finish: Passivated
Tolerances: ±.010 inch unless specified otherwise.
Internal Threads: Per SAE AS8879
Dimensions: All dimensions below are in inches
Keys: Inserts with an internal thread size of 5/16 and larger are furnished with 4 locking keys.
Smaller sizes have 2 locking keys.
Material Identification Mark: None
Lubrication: Dry Film Lube on Self-Locking Inserts only
Performance: MIL-I-45914A
![Blind-End](http://http://www.acmeindustrial.com//wp-content/uploads/2019/12/Blind-End-273x300.png)
Non-Locking
![Blind-End-Lock](http://http://www.acmeindustrial.com//wp-content/uploads/2019/12/Blind-End-Lock-298x300.png)
Self-Locking
Select the options below to narrow your choices