You are Here: Home > Installing and removing Swage-Sert® Thinwall Threaded Inserts

Search AcmeIndustrial.com
for Mil Spec, ANSI or ACME part number



Swage-Sert® Insert Installation and Removal


Locker Inserts

Swage-Sert External Thread Size Counterbore "A" Dia. +.004/-.001 Counterbore "B" Depth +/-.005 Class 3B Tap Drill Dia. Minimum Full Thread Depth "D" Minimum Drill Depth Blind Hole "E" Insert Removal Drill Size Locker Insert Installation Tool Part #
# 6-40 0.138 .045-.050 .1380-40 UNJF .112-.117 0.160 0.223 #30 225-072704
# 8-32 0.164 0.052 .1640-32 UNJ .139-.144 0.220 0.298 5/32 225-072708
# 10 -32 0.187 0.065 .1900-32 UNJ .165-.170 0.240 0.318 #17 225-072712
# 12-28 0.216 0.065 .2160-28 UNJ .190-.195 0.280 0.369 #5 225-072716
1/4-28 0.250 0.082 .2500-28 UNJ .220-.225 0.325 0.414 15/64 225-072720
5/16-24 0.312 0.082 .3125-24 UNJ .280-.285 0.415 0.519 19/64 225-072724
3/8-24 0.375 0.082 .3750-24 UNJ .342-.347 0.505 0.609 23/64 225-072728
7/16-20 0.437 0.113 .4375-20 UNJ .403-.408 0.595 0.720 27/64 225-072732
1/2-20 0.500 0.113 .5000-20 UNJ .467-.472 0.695 0.820 31/64 225-072736
9/16-24 0.562 0.113 .5625-24 UNJ .530-.535 0.785 0.889 35/64 225-072740
11/16-12 0.687 0.15 .6875-12 UNJ .624-.629 0.873 1.081 43/64 225-072744
3/4-16 0.750 0.156 .7500-16 UNJ .702-.707 0.967 1.123 47/64 225-072748
7/8-20 0.875 0.156 .8750-20 UNJF .843-.848 1.155 1.280 55/64 225-072752

Non-Locker Inserts

Swage-Sert External Thread Size Counterbore "A" Dia. +.004/-.001 Counterbore "B" Depth +/-.005 Class 3B Tap Drill Dia. Minimum Full Thread Depth "D" Minimum Drill Depth Blind Hole "E" Insert Removal Drill Size Non-Locker Insert Installation Tool Part #
# 6-40 0.138 .045-.050 .1380-40 UNJF .112-.117 0.160 0.223 #30 225-072702
# 8-32 0.164 0.052 .1640-32 UNJ .139-.144 0.220 0.298 5/32 225-072706
# 10 -32 0.187 0.065 .1900-32 UNJ .165-.170 0.240 0.318 #17 225-072710
# 12-28 0.216 0.065 .2160-28 UNJ .190-.195 0.280 0.369 #5 225-072714
1/4-28 0.250 0.082 .2500-28 UNJ .220-.225 0.325 0.414 15/64 225-072718
5/16-24 0.312 0.082 .3125-24 UNJ .280-.285 0.415 0.519 19/64 225-072722
3/8-24 0.375 0.082 .3750-24 UNJ .342-.347 0.505 0.609 23/64 225-072726
7/16-20 0.437 0.113 .4375-20 UNJ .403-.408 0.595 0.720 27/64 225-072730
1/2-20 0.500 0.113 .5000-20 UNJ .467-.472 0.695 0.820 31/64 225-072734
9/16-24 0.562 0.113 .5625-24 UNJ .530-.535 0.785 0.889 35/64 225-072738
11/16-12 0.687 0.15 .6875-12 UNJ .624-.629 0.873 1.081 43/64 225-072742
3/4-16 0.750 0.156 .7500-16 UNJ .702-.707 0.967 1.123 47/64 225-072746
7/8-20 0.875 0.156 .8750-20 UNJF .843-.848 1.155 1.280 55/64 225-072750



ISO 9001
Registered
Quality
System