Diamond-Groove Embedment Bushings

The Diamond-Groove type (DG) has a special knurl that provides superior holding strength in potting compounds and castable materials. The number of grooves is dependent on the length of the bushing.

* Fraction I.D. Range is in increments of 1/64″ (except where indicated otherwise)
Embedment Bushings are Priced on Request
Also available in Metric Sizes.
I.D. Range
Drill Size
Standard I.D. Tolerance
(add to nominal I.D.)
7/64 to 1/4 +.0001 to +.0004
Over 1/4 to 3/4 +.0001 to +.0005
Over 3/4 to 49/64 +.0002 to +.0006